Flat Back Post or Wall Clamp for 3/8″ Glass – 8611
Can be used with or without hole. 1/2″ hole if using pin should be located 1″ from glass edge to center. Finger slot fabrication will be used if pin required. Pins should be used whenever loading glass vertically on the clamps to prevent slippage when glass is not supported on the bottom. If attaching to a railing, please make sure you have a secure fastening system for the clamp.
Description
Can be used with or without hole. 1/2″ hole if using pin should be located 1″ from glass edge to center. Finger slot fabrication will be used if pin required. Pins should be used whenever loading glass vertically on the clamps to prevent slippage when glass is not supported on the bottom. If attaching to a railing, please make sure you have a secure fastening system for the clamp.
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 2.125 × 2.312 cm |
| Color | |
| Material |